驱动电机斜置在锯机底座上，通过伞齿轮及主传动轴带动锯片，锯片由液压装置锁紧在传动轴上。锯片进锯由液压驱动，进锯速度根据锯切阻力由比例阀调节。当轧件断面较大、锯切阻力高时，进锯速度慢，反之，进锯速度块。

The driving motor is inclined on the base of the saw machine, and the saw blade is driven through the bevel gear and the main drive shaft, and the saw blade is locked on the drive shaft by the hydraulic device. The sawing saw is driven by hydraulic pressure, and the speed of the saw is adjusted by the proportional valve according to the cutting resistance. When the section of the rolled piece is large and the cutting resistance is high, the speed of the saw is slow, and conversely, the speed block of the saw.

据说在14世纪欧洲就有轧机，但有记载的是1480年意大利人达·芬奇（Leonardo da Vinci）设计出轧机的草图。1553年法国人布律列尔(Brulier)轧制出金和银板材,用以制造钱币。此后在西班牙、比利时和英国相继出现轧机。

It is said that there are rolling mills in Europe in the fourteenth Century, but it is recorded that in 1480, Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate, used in the manufacture of coins. Since then, rolling mills h***e been rolled out in Spain, Belgium and Britain.

楔横轧技术是一种低耗的***生产工艺在连杆生产线上采用楔横轧制坯热模锻压力机成形工艺生产连杆锻件具有其它锻造工艺无法相比的独特优势与辊锻工艺相比材料利用率提高10%以上劳动生产率提高30 50%

Cross wedge rolling technology is an advanced production process with high precision, high efficiency, high efficiency and low cumption. On the connecting rod production line, the forming process of the die forging press of the wedge rolling blank is adopted to produce the connecting rod forgings with the unique advantages of other forging processes. Compared with the roll forging process, the utilization ratio of materials is raised by more than 10% of the labor productivity by 3050%.

六辊轧机，轧机***厂家介绍，这种轧机的辊系相对来说比较稳定，而且其主要是由一对工作辊和两对支承辊组成。不过，其在操作上有着诸多不便，因此应用并不广泛，通常是用于轧制海底电缆的铜带。

Six-high mill, rolling mill professional manufacturers that the roll system of this mill is relatively stable, and it mainly cists of a pair of work rolls and two pairs of backup rolls. However, it has many inconveniences in operation, so it is not widely used, usually used for rolling high-precision submarine cable copper strip.