H型钢在冷床上直立冷却后，由辊道送至变节距辊式矫直机进行长尺矫直，经成排台架成排后，由冷锯机切成6～24m定尺。切成定尺的轧件经人工目测检查后，进入堆垛台架堆垛，经打捆、称重、标牌后进入成品台架，由成品跨吊车吊运入库、发货。

H type steel upright in the cooling bed after cooling by roller to pitch roller straightening machine straightening ruler, the rows of bench rows, a cold sawing machine into 6 ~ 24m length. The rolled pieces, which are cut into fixed lengths, are inspected and inspected after manual inspection. They enter stacks stacking, and then enter the finished rack by bundling, weighing and sign.

驱动电机斜置在锯机底座上，通过伞齿轮及主传动轴带动锯片，锯片由液压装置锁紧在传动轴上。锯片进锯由液压驱动，进锯速度根据锯切阻力由比例阀调节。当轧件断面较大、锯切阻力高时，进锯速度慢，反之，进锯速度块。

The driving motor is inclined on the base of the saw machine, and the saw blade is driven through the bevel gear and the main drive shaft, and the saw blade is locked on the drive shaft by the hydraulic device. The sawing saw is driven by hydraulic pressure, and the speed of the saw is adjusted by the proportional valve according to the cutting resistance. When the section of the rolled piece is large and the cutting resistance is high, the speed of the saw is slow, and conversely, the speed block of the saw.

开口式机架由机架底座和上横梁组成。

开口式机架是型钢车间常见的一种机架形式。这种机架的优点是制造简单，装卸、换辊方便。其缺点是强度和刚度较低，轧辊辊跳值较大，影响产品精度，故只适用于大型轧机。

The open frame is of the frame base and the upper cross beam.

The open frame is one of the most common forms in the steel workshop. The advantages of this frame are simple manufacturing, loading and unloading, and convenient for roll change. Its disadvantage is that its strength and stiffness are low, the roll roll value is larger and the precision of the product is affected, so it is only suitable for large rolling mill.