在运转200~300小时后，应进行换油，在以后的使用中应定期检查油的质量，对于混入杂质或变质的油须及时更换。一般情况下，对于长期连续工作的减速机，按运行5000小时或每年一次更换新油.

After running for 200~300 hours, the first oil change should be done. The quality of the oil should be checked regularly in later use, and the oil mixed with impurities or deterioration must be changed in time. In general, for a long-term continuous working reducer, new oil is replaced at 5000 hours or once a year.

在减速机家族中，行星减速机以其体积小，减速范围广，精度高等诸多有点，而被应用于伺服、步进、直流等传动系统中。其作用就是在保证精密传动下，主要被用来降低转速增大扭矩和降低负载/电机的转动惯量比。

In reducer family, planetary reducer is applied to servo, step and DC tran***ission systems because of its ***all volume, wide range of deceleration and high accuracy. Its role is to ensure the precision drive, mainly used to reduce the rotational speed to increase the torque and reduce the load / motor inertia ratio.

减速机性能特点

1,产品采用模块化设计,电动机输入,输入轴和孔类型三个方面,并配置脚,法兰安装,适用于各种有效的减变速传动,可以直接取代无级调速,摆线。

2、能源消耗低、噪音低、振动小,减速机达96%。

3,使用特殊的宽带宽压力电动机,当加载在20 hz - 60赫兹频率范围内正常使用。

4、齿轮渗碳淬火热处理工艺,采用独特的低噪声齿齿形设计,确保产品的使用寿命。

Performance characteristics of reducer

1, the product adopts modular design, motor input, input shaft and hole type three aspects, and equipped with feet, flange installation, suitable for all kinds of effective variable speed tran***ission, which can directly replace stepless speed regulation and cycloidal.

2, the energy cumption is low, the noise is low, the vibration is ***all, and the efficiency of the reducer is up to 96%.

3, the use of a special wide band wide pressure motor when loaded in the range of 20 Hz - 60 Hz is normally used.

4, gear carburizing and quenching heat treatment process, using a unique low noise tooth profile design to ensure the service life of the product.

减速机的种类：一般的减速机有斜齿轮减速机(包括平行轴斜齿轮减速机、蜗轮减速机、锥齿轮减速机等等)、行星齿轮减速机、摆线针轮减速机、蜗轮蜗杆减速机、行星摩擦式机械无级变速机等等。

Type of reducer

The general reducer has helical gear reducer (including parallel shaft helical gear reducer, worm gear reducer, bevel gear reducer, etc.), planetary gear reducer, cycloid pin reducer, worm gear reducer, planetary friction mechanical stepless speed change machine and so on.