线材轧机拥有粗轧机架和与小型型材轧机类似的中间机架。与两线轧制的小型型材轧机相比，这些轧机一般被设计成可以进行高达4线的同时轧制的切分轧制。然而，抚顺sleeper，目前的发展趋势是采用单线的高速轧制。

The wire mill has a roughing mill stand and an intermediate rack similar to a ***all section mill. Compared with the two section rolling mill， these mills are generally designed for rolling up to 4 lines at the same time. However， the current development trend is single line high-speed rolling.

在粗轧机架后，中型型材轧机有两组连续的机架。连续轧机，根据孔型设计既可以水平布置，也可以立式布置。对于有平行缘的型钢和槽钢，sleeper厂家，还配有机架。

After the roughing mill， there are two sets of continuous rack in the medium section mill. The continuous rolling mill can be arranged horizontally or vertically according to the pass design. For steel and channel steel with parallel edges， universal frame is also ***ailable.

轧辊由辊身、辊颈和轴头二部分组成。辊颈安装在轴承中，并通过袖承座和压下装置把轧制力传给机架。铂头和连接轴相连接，sleeper报价，传递轧制扭矩。轴头有三种主要形式；梅花轴头、万向轴头、带键槽的或圆柱形轴头。

The roll is of two parts of the roller body， the neck of the roll and the shaft head. The roll neck is installed in the bearing and passes through the sleeve bearing seat and the press down device to the rack. The platinum head is connected to the connecting shaft to transfer the rolling torque. There are three main forms of the shaft; the shaft of a plum， a universal shaft， or a cylindrical shaft with a keyway.

圣霖国际【精益求精】-sleeper谁家好由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）有实力，信誉好，在辽宁 鞍山 的行业专用设备等行业积累了大批忠诚的客户。公司精益求精的工作态度和不断的完善创新理念将促进圣霖国际和您携手步入辉煌，共创美好未来！