旋紧紧力螺栓。所有紧力螺栓均需用力矩板手按标明的固定扭力矩数据进行固定和检查。减速机与机械设备间的正确安装类同减速机与驱动电机间的正确安装。关键是要必须保证减速机输出轴与所驱动部分轴同心度一致。

Tighten tight bolt. All tight bolts must be fixed and checked with the fixed torque data marked by the torque plate hand. The correct installation between the reducer and the mechanical equipment is the same as that between the reducer and the driving motor. The key is to ensure that the output shaft of the reducer is c***istent with the of the drive shaft.

当选用斜齿轮减速机时有以下几点需要注意：

允许输入轴径：减速机的输入轴孔与电机输出轴一般是通过一个厚度可以变化的套环来连接的。当不加套环时减速机输入轴孔为高值。

When choosing a helical gear reducer, there are several points to be paid attention to:

Allowable diameter

The input shaft of the reducer and the output shaft of the motor are generally connected by a sleeve that can be changed by a thickness. The input shaft hole of the reducer is the maximum when the ring is not added.

齿轮声辐射特征分析 在选择用不同结构形式的齿轮时，对其特定结构建立声辐射模型，进行动力学分析，对齿轮传动系统噪声进行预先评估。Ofcourse,thevarietyofreducerisalsocontinuouslyenriched。以便根据使用者的不同要求（使用场所，是 否无人操作，是否在城区内，地上、地下建筑物有无特定要求，是否有噪声防护，或无其他特定要求）去满足。

The acoustic radiation characteristic analysis of gear in the selection of gear with different structure forms, set up the acoustic radiation model to its specific structure, carry on the dynamic analysis, and evaluate the gear tran***ission system noise in advance. In order to meet the users' requirements (use sites, unmanned operati***, whether there are specific requirements in the urban area, ground or underground buildings, noise protection, or other specific requirements).