特别是输出辊道，过去多采用上述方法对中，但是***近有把辊距缩小的倾向，因而采用后一种斜辊布置方式的辊道正在减少。这是为了在轧制薄规格的带钢时避免使带钢在辊道上因终轧速度高而造成折叠。此外，对于辊道的速度和辊子直径也要充分考虑好。

In particular, the output roller table used to use the above methods in the past, but recently there is a tendency to narrow the distance between rolls. Therefore, the roller table with the latter one is decreasing. to ***oid folding the strip on a thin strip of strip to ***oid the high finishing speed of the strip on the roller. In addition, the speed of the roller and the diameter of the roller should be fully c***idered.

包胶滚筒安装方便

包胶滚筒安装起来特别的方便，不需要安装好在送过去，现场进行安装就可以了，滚筒也是不需要拆卸的，这样是非常方便的，你只需要付钱、收获、等着用就可以了，其他的都有***的人士来干。

Easy installation of rubber drum

Package rubber drum installation is especially convenient, do not need to install in the past, the site can be installed, the cylinder is not required to be disassembled, so it is very convenient, you only need to pay, harvest, and other use, and other professional people to do.

皮带输送机的常规设计方法所存在的问题带式输送机常规设计方法实际上是一种安全或是偏于保守的设计方法。例如。选用的输送带安全系数、运行阻力系数偏大，从而造成选用的电动机功率过大，带宽过宽或是抗拉强度要求较高。

The conventional design method of belt conveyor is a safe or c***ervative design method. For example. The safety factor and the running resistance coefficient of the selected conveyor belt are too large, resulting in excessive power selection, wide bandwidth or high tensile strength.