工作辊道靠近工作机座，在工作机座前后将轧件喂入轧机，辊道价格，轧制后接住轧件，又返回送入轧机进行轧制，辊道，直到轧成成品后送到下一工序。工作辊道又分为机架辊道、主要工作辊道和辅助工作辊道。机架辊道是指装在工作机座的机架中的少数几个工作辊。

The work roll is close to the working stand， and the workpiece is fed into the rolling mill before and after the machine seat. After rolling， the workpiece is received and rolled back to the mill for rolling， until the finished product is sent to the next process.

The work roller table is also divided into the roller table， the main working roller and the auxiliary working roller.

The rack roller is a few work rolls in the frame of the working frame.

皮带输送机的常规设计方法所存在的问题带式输送机常规设计方法实际上是一种安全或是偏于保守的设计方法。例如。选用的输送带安全系数、运行阻力系数偏大，从而造成选用的电动机功率过大，带宽过宽或是抗拉强度要求较高。

The conventional design method of belt conveyor is a safe or c***ervative design method. For example. The safety factor and the running resistance coefficient of the selected conveyor belt are too large， resulting in excessive power selection， wide bandwidth or high tensile strength.

在带钢热连轧机上使用着许多辊道，它们被分成若干段，每一段辊道或者以***的或者以与轧辊同步的速度和方向运送轧件。

为使轧件能够在辊道中心运行，采用鼓形辊，并且交替地使左右两边的水平面稍微倾斜，或者使辊子的轴线与轧件运行方向的交角交替地比直角稍微偏斜一些。

Many roller tables are used on hot strip mills. They are divided into several segments，辊道生产， each section of rollers or parts transported independently or at the same speed and direction with the rollers.

In order to make the workpiece can be run in the center of the drum shaped roller， roller， and alternately on both sides of the horizontal plane or slightly tilted， the roller axis and the running direction of the rolling angle alternately than some slightly skewed angle.

辊道-辊道生产-圣霖国际(推荐商家)由鞍山市圣霖进出口贸易有限公司提供。辊道-辊道生产-圣霖国际(推荐商家)是鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）今年全新升级推出的，以上图片仅供参考，请您拨打本页面或图片上的联系电话，索取联系人：王秋。