减速机内部齿轮齿形修整（修缘和修根）和齿顶倒角 将齿顶的齿形切削成比正确的渐开曲线略呈凸形。当齿轮齿面受外力产生变形时，reducer生产商，可以避免对与之啮合的齿轮产生干涉，并且可以降低噪音，延长齿轮寿命。

The internal gear of the reducer is trimmed (trim and trim) and tooth top chamfering to make the tooth shape of the tooth top convex than the correct involute curve. When the gear tooth surface is deformed by external force， it can ***oid interference to the gears engaged with it， and can reduce noise and prolong the service life of gears.

安装前确认电机和减速机是否完好无损，reducer，并且严格检查电机与减速机相连接的各部位尺寸是否匹配，这里是电机的***凸台、输入轴与减速机凹槽等尺寸及配合公差。

Before installation， confirm whether the motor and reducer are in good condition， and strictly check whether the size of each part of the motor connected to the reducer is match. Here is the size and fit tolerance of the motor's locating lug，reducer价格， input shaft and reducer groove.

减速机与工作机的联接：减速机直接套装在工作机主轴上，当减速机运转时，作用在减速机箱体上的反力矩，又安装在减速机箱体上的反力矩支架或由其他方法来平衡。机直接相配，另一端与固定支架联接.

The connection between the reducer and the working machine: the reducer is directly installed on the main shaft of the machine， when the reducer operates， the torque acting on the gearbox body is installed on the reverse torque support on the reduction box body or by other methods to balance. The machine is directly matched and the other end is connected with the fixed support.

reducer生产商-reducer-圣霖国际【顾客至上】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）是一家从事“型材设备,轧钢设备,轨道设备”的公司。自成立以来，我们坚持以“诚信为本，稳健经营”的方针，勇于参与市场的良性竞争，使“圣霖”品牌拥有良好口碑。我们坚持“服务为先，用户至上”的原则，使圣霖国际在行业专用设备中赢得了众的客户的信任，树立了良好的企业形象。 特别说明：本信息的图片和资料仅供参考，欢迎联系我们索取准确的资料，谢谢！