型面联接：是利用非圆剖面的轴与相应形状的零件的毂孔配合而构成的联接，作为机械传动中的联接方式，型面联接相对于传统的键联接相比，具有联接强度高，没有应力集中，可以传递大扭矩且效率高的同时也可以承受冲击载荷，并且对于一些大型机械装备来讲其拆装方便及维修便利。

is the hub hole type surface connection: the non-circular section axis and the corresponding shape parts with a connection， as the connection mode in mechanical tran***ission， compared with the traditional linkage type surface connection compared with connecting strength， no stress ，圣霖国际联接机， can large torque and high efficiency at the same time it can withstand the impact load，圣霖国际联接机采购， and for some large mechanical equipment for its disassembly and convenient maintenance.

楔键联接：键的上下两表面是工作面，键的上表面和轮毂键槽底面均有1∶100的斜度，装配后，键即楔紧在轴和轮毂的键槽里，工作表面产生很大预紧力。

Wedge key connection: the upper and lower two surfaces of the key are the working faces. The upper surface of the key and the bottom of the hub keyway h***e 1 to 100 slope. After assembly，圣霖国际联接机价格， the key is wedged tightly in the keyway of the shaft and hub， and the working surface has a large pre tightening force.

矩形花键联接是应用***为广泛的花键联接。 应用广泛。如航空发动机、汽车、燃气轮机、机床、工程机械、拖拉机、农业机械及一般机械传动装置等等。渐开线花键的齿廓为渐开线，分度圆压力角α有30°及45°两种。齿顶高分别为0.5m和0.4m(m为模数)。

The rectangular spline connection is the most widely used spline connection. It is widely used. Such as aero engine， automobile， gas turbine， machine tool， engineering machinery， tractor， agricultural machinery and general mechanical tran***ission equipment and so on. The tooth profile of the involute spline is involute， and the pressure angle of the dividing circle is 30 and 45 degrees. The top of the tooth is 0.5m and 0.4m respectively (M is the modulus).

圣霖国际联接机采购-圣霖国际联接机-圣霖国际【用心服务】由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）在行业专用设备这一领域倾注了无限的热忱和热情，圣霖国际一直以客户为中心、为客户创造价值的理念、以品质、服务来赢得市场，衷心希望能与社会各界合作，共创成功，共创辉煌。相关业务欢迎垂询，联系人：王秋。