据说在14世纪欧洲就有轧机，但有记载的是1480年意大利人达·芬奇（Leonardo da Vinci）设计出轧机的草图。1553年法国人布律列尔(Brulier)轧制出金和银板材，用以制造钱币。此后在西班牙、比利时和英国相继出现轧机。

It is said that there are rolling mills in Europe in the fourteenth Century，620rolling mill， but it is recorded that in 1480， Leonardo Da Vinci (Italian Italian designer Da Finch) designed the draft for rolling mills. In 1553 the French law Adler cloth (Brulier) rolled gold and silver plate， used in the manufacture of coins. Since then， rolling mills h***e been rolled out in Spain， Belgium and Britain.

驱动电机斜置在锯机底座上，通过伞齿轮及主传动轴带动锯片，锯片由液压装置锁紧在传动轴上。锯片进锯由液压驱动，铁岭rolling mill，进锯速度根据锯切阻力由比例阀调节。当轧件断面较大、锯切阻力高时，进锯速度慢，反之，进锯速度块。

The driving motor is inclined on the base of the saw machine， and the saw blade is driven through the bevel gear and the main drive shaft， and the saw blade is locked on the drive shaft by the hydraulic device. The sawing saw is driven by hydraulic pressure，300rolling mill， and the speed of the saw is adjusted by the proportional valve according to the cutting resistance. When the section of the rolled piece is large and the cutting resistance is high， the speed of the saw is slow， and conversely， the speed block of the saw.

H型钢在冷床上直立冷却后，由辊道送至变节距辊式矫直机进行长尺矫直，经成排台架成排后，由冷锯机切成6～24m定尺。切成定尺的轧件经人工目测检查后，进入堆垛台架堆垛，经打捆、称重、标牌后进入成品台架，由成品跨吊车吊运入库、发货。

H type steel upright in the cooling bed after cooling by roller to pitch roller straightening machine straightening ruler， the rows of bench rows， a cold sawing machine into 6 ~ 24m length. The rolled pieces， which are cut into fixed lengths，280rolling mill， are inspected and inspected after manual inspection. They enter stacks stacking， and then enter the finished rack by bundling， weighing and sign.

铁岭rolling mill-圣霖国际(推荐商家)由鞍山市圣霖进出口贸易有限公司提供。鞍山市圣霖进出口贸易有限公司（shenglininternational.cn）实力雄厚，信誉可靠，在辽宁 鞍山 的行业专用设备等行业积累了大批忠诚的客户。公司精益求精的工作态度和不断的完善创新理念将***圣霖国际和您携手步入辉煌，共创美好未来！