日常模具生产中，应注意维护冲切凸、凹模刃口的锋利度。当冲切刃口磨损时，材料所受拉应力将增大，从而冲压件产生翻料、扭曲的趋向加大。

In daily mold production, attention should be paid to sharpness of punching and conc***e die edges. When the cutting edge is worn, the tensile stress of the material will increase, and the stamping and bending will increase.

薄板：锯削时尽可能从宽面锯下去，若必须从窄面锯下时，可用两块木垫夹持，连木块一起锯下，也可把薄板直接夹在虎钳上，用手锯作横向斜推锯，使锯齿与薄板料接触的齿数增加，避免锯齿崩裂。

Thin plate: sawing as far as as wide as when sawing. If must be sawed from narrow surface, it can be held by two wooden blocks and sawed together with wooden blocks. The sheet can be clipped directly to the vise, and a hand saw is used as a transverse oblique saw to increase the number of teeth contacted with the sheet material and ***oid the crack of the saw teeth.

手锯锯削的注意事项

锯条的松紧要合适，且锯割时压力不能太大，以防折断伤人；

当锯缝歪斜时，不可急于纠正，而需要慢慢地逐步纠正。

Notice of hand saw cutting

The tightness of the saw blade should be suitable, and the pressure should not be too large during sawing, so as to prevent breaking and hurting people.

When the SAW seam is skewed, it can not be corrected in a hurry, but it needs to be corrected gradually.