徐州SKF轴承不可逆转性损坏时容易损坏。例如，需要检查进口轴承，以了解轴承不工作时如何检查轴承。让我们看一下轴承剂的详细答案。轴承具有额定负荷高、噪音低、大大降低维护成本、延长机器运行时间等优点。

Xuzhou SKF bearings are easy to be damaged when irreversible damage occurs. For example, imported bearings need to be inspected to understand how to inspect bearings when bearings are not working. Let's take a look at the detailed answer to the bearing agent. Bearing has the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time.

进口轴承损坏检验方法

Inspection Method for Imported Bearing Damage

轴承的疲劳寿命可以表示为当徐州SKF轴承旋转较大或更恒定或已知时，对应于总旋转的总工作小时数。

The fatigue life of the bearing can be expressed as the total working hours corresponding to the total rotation when the rotation of Xuzhou SKF bearing is larger or more c***tant or known.

介绍了滚动轴承停机检查的几个步骤：检查两个手指之间的摩擦润滑油污迹，如果有污垢，可以感觉到，或在手背上涂一薄层润滑油，并密封。

Several steps of rolling bearing shutdown inspection are introduced: check the friction lubricant stain between two fingers, if there is dirt, you can feel it, or coat a thin layer of lubricant on the back of your hand, and seal it.

更换润滑油功能：可减少或避免摩擦磨损，润滑轴承在排出旧油后，如有可能，再注入新油，让机器低速运转几分钟。使徐州SKF轴承机油收集尽可能多的残留污染物，然后清理机油。你尽量在用油之前先过滤一下。

Replacement of lubricating oil function: can reduce or ***oid friction and wear, lubricating bearing after discharging old oil, if possible, then inject new oil, let the machine run at low speed for several minutes. Make Xuzhou SKF bearing oil collect as many residual pollutants as possible, and then clean up the oil. You try to filter the oil before you use it.

润滑脂润滑的轴承在更换润滑脂时应避免接触轴承的任何部分，因为这些残留的纤维可能会楔入滚动部件之间并造成损坏，特别是在小轴承的应用中。

Grease-lubricated bearings should ***oid contacting any part of the bearing when replacing the grease, because these residual fibers may wedge between rolling parts and cause damage, especially in the application of ***all bearings.

盖住外露的轴承。检查轴承时，不要将其暴露在污染物或湿气中。徐州SKF轴承具有额定负荷高、噪音低、大大降低维护成本、延长机器运行时间等优点。如果工作中断，机器应覆盖油纸、塑料板或类似材料。

Cover the exposed bearing. When inspecting bearings, do not expose them to contaminants or moisture. Xuzhou SKF bearings h***e the advantages of high rated load, low noise, greatly reducing maintenance costs and prolonging machine operation time. If work is interrupted, the machine should be covered with oilpaper, plastic sheets or similar materials.

以上资料介绍了进口轴承损坏的检验方法。当轴承识别出轴承的真假时，通过触摸轴承上的钢印，可以更快、更准确地识别轴承。这张***不能用手触摸，但可以用钉子触摸。

The above information introduces the inspection method of imported bearing damage. When the bearing recognizes the true or false of the bearing, it can recognize the bearing more quickly and accurately by touching the steel mark on the bearing. This stamp can't be touched by hand, but it can be touched by nails.

 

文章来自：徐州SKF轴承 www.wh-skf.com

Article from: Xuzhou SKF Bearing www.wh-skf.com

文章来自：徐州INA轴承 www.ina-china.cn

Article from: Xuzhou INA Bearing www.ina-China.cn

文章来自：徐州NSK轴承 www.klbbearings.com

Article from: Xuzhou NSK Bearing www.klbbearings.com

 

***：524085168

电话：0510-81207777

手机：13311666672/13395185757