泰州SKF轴承密封件与其相对运动部件接触，并且密封件和接触密封件之间没有间隙。由于密封件与配件直接接触，接触面摩擦力大，热值高，润滑性差，摩擦损伤大，降低了密封效果和性能。因此，它只能适用于低速和中速条件。接触式密封通常用于毛毡密封、杯形密封和其*他结构形式。这些密封件用于不同的场合。轴承是支承轴承的重要组成部分。它的重要作用是引导轴的旋转。它也可以是一个在轴承轴上自*由旋转的部件。它主要减少摩擦力。你可以想象，如果一个设备损坏没有轴承或轴承，它总是嘈杂。

Taizhou SKF bearing seals are in contact with its relative moving parts, and there is no gap between the seals and the contact seals. Because of the direct contact between seals and fittings, the contact surface has high friction force, high calorific value, poor lubricity and great friction damage, which reduces the sealing effect and performance. Therefore, it can only be applied to low and medium speed conditi***. Contact seals are usually used for felt seals, cup seals and other structural forms. These seals are used in different situati***. Bearing is an important part of supporting bearing. Its important role is to guide the rotation of the axis. It can also be a self-rotating component on the bearing shaft. It mainly reduces friction. You can imagine that if a device is damaged without bearings or bearings, it is always noisy.

非接触式泰州SKF轴承密封是一种具有适当间隙的密封，它不与密封的相对运动部分接触。这种密封件摩擦热小，不磨损。它特别适用于高速和高温的应用场合。非接触式密封通常采用各种结构形式，如间隙式、迷宫式、垫片式，适用于各种场合。非接触式密封的间隙应尽可能小。

The non-contact SKF bearing seal of Taizhou is a kind of seal with appropriate clearance, which does not contact with the relative moving part of the seal. This kind of seal has little friction heat and no wear. It is especially suitable for high-speed and high-temperature applicati***. Non-contact seals usually adopt various structural forms, such as clearance type, labyrinth type and gasket type, and are suitable for various occasi***. The clearance of non-contact seal should be as ***all as possible.

带式压滤机的工作过程与废水污泥密不可分。这两种物质对泰州SKF轴承的损坏非常严重。所选轴承的密封和润滑要求非常高。

The working process of belt filter press is inseparable from wastewater sludge. The damage of these two substances to SKF bearings in Taizhou is very serious. The sealing and lubrication requirements of the selected bearings are very high.

1。安装也要求非常标准、细心和粗心。给轴承带来强烈的冲击，避免**痕、压痕和***。

1. Installation also requires very standard, careful and careless. Bring strong impact to bearing, ***oid ** mark, indentation and fracture.

2。在使用过程中，应注意防锈处理，以免使水太脏。清洁泰州SKF轴承座周边，加润滑油和***。

2. In the use process, attention should be paid to rust-proof treatment, so as not to make the water too dirty. Clean the periphery of SKF bearing seat in Taizhou, add lubricant and maintain.

不同的裂纹包括原材料裂纹、锻造裂纹、磨削裂纹和热处理裂纹。在未来的轴承运行中，这些裂纹会迅速扩大应力集中源，导致轴承断裂，对轴承的寿命和安*全产生很大影响。事实上，轴承厂为了重要目的已经对其部件进行了完全的磁或射线检查。

Different cracks include raw material cracks, forging cracks, grinding cracks and heat treatment cracks. I n the future operation of bearings, these cracks will rapidly expand the source of stress concentration and lead to bearing fracture, which will h***e a great impact on the life and safety of bearings. In fact, bearing factories h***e carried out complete magnetic or radiographic inspecti*** of their components for important purposes.

仓库应保持干燥，相对湿度应控制在80个点以下，室内温度应控制在25℃，昼夜不得有大的温度变化。低温会导致防锈剂容易结晶；高温、轴承会开裂，导致一些金属的**露腐蚀，防锈剂容易丢失（蒸发）或变质；日温差容易引起轴承表面水冷凝物的腐蚀。表面。

The warehouse should be kept dry, the relative humidity should be controlled below 80 points, the indoor temperature should be controlled at 25 degrees Celsius, and there should be no big temperature change day and night. Low temperature will lead to rust inhibitor easy to crystallize; high temperature, bearing will crack, leading to some metal ** dew corrosion, rust inhibitor easy to lose (evaporate) or deteriorate; daily temperature difference is easy to cause the corrosion of water condensate on bearing surface. Surface.

文章来自：泰州SKF轴承 www.wh-skf.com

 

文章来自：泰州INA轴承 www.ina-china.cn

 

文章来自：泰州NSK轴承 www.klbbearings.com

 

 

***：524085168

电话：0510-81207777

手机：13311666672/13395185757