泰州NSK轴承安装后必*须进行维修。轴承也不例外。安装后,如果测量主轴的径向跳动,可以发现每个转动的测量值都有一定的变化。
Taizhou NSK bearings must be repaired after installation. Bearings are no exception. After installation, if the radial runout of the spindle is measured, it can be found that the measured value of each rotation has a certain change.
这种变化将在很大程度上重复。圆周*旋转的精度是衡量变化程度的指标。当进行连续测量时,可以发现经过一定旋转后,所需旋转近似重复以表示循环旋转精度的“准周期”。准周期变化范围大,即周期旋转精度差。
This change will be repeated to a large extent. The accuracy of circumference * rotation is an index to measure the degree of change. When continuous measurements are made, it can be found that after a certain rotation, the required rotation is approximately repeated to represent the "quasi-period" of cyclic rotation accuracy. The range of quasi-periodic variation is large, that is, the precision of periodic rotation is poor.
泰州NSK轴承调整的主要因素有安装、维护、使用和维护,均满足技术要求。根据轴承安装、使用、维护和运行的技术要求,对轴承的接触载荷、温度、速度、振动、速度、噪声和润滑状态进行监测和监测。发现异常原因并及时调整以***正常运行。
The main factors of NSK bearing adjustment in Taizhou include installation, maintenance, use and maintenance, which meet the technical requirements. According to the technical requirements of bearing installation, use, maintenance and operation, the contact load, temperature, speed, vibration, speed, noise and lubrication status of bearings are monitored and monitored. Discover the abnormal cause and adjust it in time to resume normal operation.
安装条件是使用泰州NSK轴承的因素之一。轴承的重力是导致部件状态不正确变化的主要因素。它终止于异常操作和早期生命。
Installation condition is one of the factors of using Taizhou NSK bearing. The gr***ity of bearings is the main factor leading to incorrect changes in the state of components. It terminates in abnormal operati*** and early life.
内部因素主要是结构设计、制造工艺和材料质量,它们决定着轴承的质量。噪声和振动是随机的。
Internal factors are mainly structural design, manufacturing process and material quality, which determine the quality of bearings. Noise and vibration are random.
润滑剂粘度越高,声压水平越低。但对于油脂润滑,皂纤维的粘度、形状和尺寸会影响噪声值。
The higher the lubricant viscosity, the lower the sound pressure level. But for grease lubrication, the viscosity, shape and size of soap fibers will affect the noise value.
当径向间隙增大时,声压级急剧增大。
When the radial clearance increases, the sound pressure level increases sharply.
泰州NSK轴承座刚度越高,总声压水平越低。即使速度增加,总声压级也略有增加。
The higher the stiffness of Taizhou NSK bearing seat is, the lower the total sound pressure level is. Even with the increase of velocity, the total sound pressure level increases slightly.
无论转速如何变化,噪声的主频率基本不变,声压级随转速的增加而增大。
No matter how the rotational speed changes, the main frequency of noise is basically unchanged, and the sound pressure level increases with the increase of rotational speed.
轴承安装后,相关人员应承担定期维护的任务,这不仅能延长轴承的使用寿命,而且能保证机器的顺利运行。
After the bearing is installed, the relevant personnel should undertake the task of regular maintenance, which can not only prolong the service life of the bearing, but also ensure the ***ooth operation of the machine.
文章来自:泰州SKF轴承 www.wh-skf.com
Article from: Taizhou SKF Bearing www.wh-skf.com
文章来自:泰州INA轴承 www.ina-china.cn
Article from: Taizhou INA Bearing www.ina-China.cn
文章来自:泰州NSK轴承 www.klbbearings.com
Article from: Taizhou NSK Bearing www.klbbearings.com
***:524085168
电话:0510-81207777
手机:13311666672/13395185757
版权所有©2025 产品网