确定南京NSK轴承是否应该修理的详细标准是轴承已经完全使用并且接近损坏。

The detailed criterion for determining whether Nanjing NSK bearings should be repaired is that the bearings are fully used and close to damage.

采用铁谱仪、SPM或I-ID-1型轴承状态监测仪对轴承的工作状态进行判断，判断何时进行修理至正常。

Ferrograph, SPM or I-ID-1 bearing condition monitor are used to judge the working state of the bearing and determine when to repair to normal.

例如，当使用HD-1时，当指针从警告区接近***区并且在采取诸如改进平滑指针之类的措施之后不返回时，它可以被识别为瑞典南京NSK轴承本身，此时轴承在进入***区之前被修理至正常。美国。毕竟，离风险区有多远，维修的开始可以通过经验来调整。

For example, when HD-1 is used, when the pointer approaches the danger zone from the warning zone and does not return after taking measures such as improving the ***ooth pointer, it can be identified as the Swedish Nanjing NSK bearing itself, at which point the bearing is repaired to normal before entering the danger zone. U.S.A. After all, how far away from the risk zone, the beginning of maintenance can be adjusted through experience.

充分利用轴承的工作潜力，及时报告南京NSK轴承的维护情况，防止故障的发生，是平稳经济的。

It is stable and economical to make full use of the working potential of bearings, report the maintenance of Nanjing NSK bearings in time and prevent the occurrence of faults.

在没有这种装置的情况下，操作者可以将杠杆或扳手和其余工具放置在入口轴承的壳体部分附近，使工具的耳朵羞愧，以便从工具中听到轴承的声音，当然，也可以用医药行业用器械对其进行修改。***非常好。

In the absence of such a device, the operator can place the lever or wrench and other tools near the housing portion of the inlet bearing to shame the tool's ears so that the sound of the bearing can be heard from the tool, and of course, it can be modified with medical instruments. The stethoscope is very good.

进口轴承的正常运行声音应该是平均、平滑、无刺耳的声音，而南京NSK轴承的异常运行声音是有形的、五彩缤纷的间歇性、冲击性或刺耳的声音。步骤可以分析什么异常声音对应于任何异常轴承。在瑞典，有许多难以解释的异常声音，主要是由经验的积累决定的。

The normal operation sound of imported bearings should be ***erage, ***ooth and non-harsh, while the abnormal operation sound of Nanjing NSK bearings is tangible, colorful intermittent, impact or harsh sound. Steps can analyze what abnormal voice corresponds to any abnormal bearing. In Sweden, there are many difficult to explain abnormal voice, mainly determined by the accumulation of experience.

使用麦克风检查南京NSK轴承滚动声音的大小和质量。即使轴承轻微脱落，也会***异常和不规则的声音。这些轴承获得了广泛的经验，所以他们有必要的知识和专一知识来开发、制造和使用各种***的工程产品。小型轴承，如微型轴承，只有0.003克，大轴承高达三十四吨。

Use microphone to check the size and quality of rolling sound of Nanjing NSK bearing. Even if the bearing is slightly off, abnormal and irregular sound will be restored. These bearings h***e gained extensive experience, so they h***e the necessary knowledge and expertise to develop, manufacture and use a variety of advanced engineering products. ***all bearings, such as miniature bearings, are only 0.003 grams, with large bearings up to thirty-four t***.

 

文章来自：南京SKF轴承 www.wh-skf.com

The article is from: Nanjing SKF bearing www.wh-skf.com

文章来自：南京INA轴承 www.ina-china.cn

The article is from: Nanjing INA bearing www.ina-china.cn

文章来自：南京NSK轴承 www.klbbearings.com

The article is from: Nanjing NSK bearing www.klbbearings.com

 

***：524085168  

电话：0510-81207777

手机：13311666672