在使用江苏SKF轴承的过程中，轴承表面上的材料经常像鳞片一样收缩。很多人用江苏SKF轴承来观察这种现象，但很多人不知道为什么。事实上，轴承表面损耗的主要原因如下：

In the process of using Jiangsu SKF bearings, the material on the bearing surface often shrinks like scales. Many people use Jiangsu SKF bearings to observe this phenomenon, but many people do not know why. In fact, the main reas*** for bearing surface loss are as follows:

1。轴承轴承太长，不会因疲劳而脱落。江苏SKF轴承在使用中是寿命，如果轴承负荷过大，则会降低轴承的寿命，让轴承过早退役，此时轴承会损坏或磨损，导致皮肤脱落。在轴承的使用中，首先要保证轴承的工作负荷，这样轴承的负荷就不会太大。

1. Bearing bearing is too long, and will not fall off because of fatigue. Jiangsu SKF bearing in use is life, if the bearing load is too large, it will reduce the life of the bearing, let the bearing premature retirement, at this time the bearing will be damaged or worn, causing skin to fall off. In the use of bearings, first of all, to ensure the bearing load, so that the bearing load will not be too large.

2。江苏SKF轴承的外部物体被***，轴承损坏。轴承密封失效后，部分杂质和杂质进入轴承，给轴承带来麻烦。同时，会对江苏SKF轴承表面造成损伤，导致轴承蒙皮磨损，降低轴承寿命。轴承使用时，必须定期检查轴承的密封状态，保护轴承的内部结构，确保轴承正常工作。

2. The external object of SKF bearing in Jiangsu is invaded and the bearing is damaged. After the bearing seal fails, some impurities and impurities enter the bearing, causing trouble to the bearing. At the same time, it will cause damage to the surface of SKF bearing in Jiangsu, which will cause wear and tear of bearing skin and reduce bearing life. When bearing is used, the sealing state of the bearing must be checked regularly to protect the internal structure of the bearing so as to ensure normal operation of the bearing.

3。江苏SKF轴承润滑油使用不当。润滑剂主要用于减少轴承的摩擦，但润滑油的不当使用有时不仅有助于轴承，而且影响轴承的工作。如果油太小，轴承会受到影响，所以及时检查轴承油。

3. Jiangsu SKF bearing lube oil is not used properly. Lubricants are mainly used to reduce the friction of bearings, but improper use of lubricants sometimes not only helps the bearings, but also affects the work of the bearings. If the oil is too ***all, the bearing will be affected, so check the bearing oil in time.

 

文章来自：江苏SKF轴承 www.wh-skf.com

The article comes from: Jiangsu SKF bearing www.wh-skf.com

文章来自：江苏INA轴承 www.ina-china.cn

The article comes from: Jiangsu INA bearing www.ina-china.cn

文章来自：江苏NSK轴承 www.klbbearings.com

The article comes from: Jiangsu NSK bearing www.klbbearings.com