不同用途
水泵具有不同的用途,不同的输送液体介质,不同的流量、 不同扬程的范围,大流量混流泵生产厂家,因此,大流量混流泵价格,它的结构形式当然也不一样,材料也不同,概括起来,大流量混流泵维修,大致可以分为:
1 、城市供水 2 、污水系统 3 、土木、建筑系统 4 、农业水利系统 5 、电站系统
6 、化工系统 7 、石油工业系统 8 、矿山冶金系统 9 、轻工业系统 10 、船舶系统往复泵、柱塞泵、活塞泵、隔膜泵、转子泵、螺杆泵、液环泵、齿轮泵、滑片泵、罗茨泵、滚柱泵、凸轮泵、蠕动泵、扰性泵、叶片泵、离心泵、轴流泵、混流泵、漩涡泵、射流泵、喷射泵、水锤泵、真空泵、旋壳泵、软管泵、蜗杆泵
8、水泵在冬季使用时,遵义市大流量混流泵,停车后应将水泵内和管道内的存水放尽以防冻裂。
If use the pump
in winter, pls run off the water from the pump and pipes.
9、水泵每使用一个灌溉季节后,应更换润滑黄油后存放。
Replace the
lubricating oil after using the pump for one irrigation season.
10、水泵工作满500小时,应仔细拆卸检查零件的磨损情况,如长期停用,应将运转部分拆下擦干上油妥善保管。
6、轴承发热
The bearing is
hot
1、润滑油脂不足
2、润滑油质量不好或不清洁
3、轴心没有对准
4、轴承松动或磨损
5、皮带太紧
1.Lubricating grease is not enough
2.The quality of lubricating oil is not
good or dirty
3.The axes is not aiming
4.The bearing is loose or attrition
5.The belt is too tight.
1、加油
2、清洗轴承
3、找正
4、修正
5、适当放松
1.Add lubrication oil
2.Wash
the bearing
3.Aligning
4.Amending
5.Loosen it properly
版权所有©2025 产品网