9945APC|聚碳酸酯怎么选料请T&V:153-3800-1126T:170-8463-1798沙伯基础（原GE）怎么选料请T&V:153-3800-1126T:170-8463-1798规格级别：阻燃注塑怎么选料请T&V:153-3800-1126T:170-8463-1798外观颜色：清晰/透明怎么选料请T&V:153-3800-1126T:170-8463-1798产品用途：薄壁部件怎么选料请T&V:153-3800-1126T:170-8463-1798加工条件：注射成型怎么选料请T&V:153-3800-1126T:170-8463-1798备注说明：无溴、阻燃性能怎么选料请T&V:153-3800-1126T:170-8463-17989945A物性表物理性能怎么选料请T&V:153-3800-1126T:170-8463-1798额定值单位测试方法比重1.20g/cmASTMD792熔流率(300℃/1.2kg)10g/10minASTMD1238收缩率(流动:3.20mm)0.50到0.70%InternalMethod(横向流动:3.20mm)0.50到0.70%InternalMethod吸水率(饱和,23℃&l)0.35%ISO62(平衡,23℃,50%RH)怎么选料请T&V:153-3800-1126T:170-8463-17980.15%ISO62机械性能额定值单位测试方法球压硬度(H358/30)95.0MPaISO2039-1拉伸模量怎么选料请T&V:153-3800-1126T:170-8463-17982380MPaASTMD6382350MPaISO527-2/1抗张强度(屈服)64.0MPaASTMD638(屈服)63.0MPaISO527-2/50(断裂)66.0MPaASTMD638(断裂)65.0MPaISO527-2/50伸长率(屈服)6.0%ASTMD638(屈服)6.0%ISO527-2/50(断裂)120%ASTMD638(断裂)100%ISO527-2/50弯曲模量(50.0mm跨距)2450MPaASTMD7901300MPaISO178弯曲强度90.0MPaISO178(屈服,50.0mm跨距)102MPaASTMD790简支梁缺口冲击强度(-30℃)14kJ/mISO179/1eA(23℃)73kJ/mISO179/1eA(-30℃)无断裂ISO179/1eU(23℃)无断裂ISO179/1eU悬壁梁缺口冲击强度(-30℃)110J/mASTMD256(23℃)820J/mASTMD256(-30℃)12kJ/mISO180/1A(23℃)70kJ/mISO180/1A无缺口伊佐德冲击强度(-30℃)无断裂ISO180/1U(23℃)无断裂ISO180/1U装有测量仪表的落镖冲击(23℃,TotalEnergy)79.0JASTMD3029热性能额定值单位测试方法热变形温度(0.45MPa,未退火,3.20mm)138℃ASTMD648(0.45MPa,未退火,100mm跨距)136℃ISO75-2/Be(1.8MPa,未退火,3.20mm)127℃ASTMD648(1.8MPa,未退火,100mm跨距)125℃ISO75-2/Ae维卡软化温度143℃ASTMD1525141℃ISO306/B50142℃ISO306/B120BallPressureTest(125℃)PassIEC60695-10-2线形膨胀系数(流动:-40到40℃)0.000068cm/cm/℃ASTME831(流动:23到80℃)0.000070cm/cm/℃ISO11359-2(流动:-40到40℃)0.000073cm/cm/℃ASTME831(流动:23到80℃)0.000070cm/cm/℃ISO11359-2导热系数0.20W/m/KISO8302电气性能额定值单位测试方法表面电阻率>1.0E+15ohmIEC60093体积电阻率>1.0E+15ohm·cmIEC60093耐电强度(3.20mm,在油中)17kV/mmIEC60243-1相对电容率(50Hz)2.70IEC60250(60Hz)2.70IEC60250(1MHz)2.70IEC60250耗散因数(50Hz)0.0010IEC60250(60Hz)0.0010IEC60250(1MHz)0.010IEC60250漏电起痕指数225VIEC60112可燃性额定值单位测试方法UL阻燃等级(0.800mm)V-2UL94(1.80mm)V-0UL94灼热丝易燃指数(1.00mm)960℃IEC60695-2-12热灯丝点火温度(1.00mm)850℃IEC60695-2-13(3.00mm)850℃IEC60695-2-13极限氧指数35%ISO4589-2光学性能额定值单位测试方法透射率(2540µm)88.0%ASTMD1003雾度(2540µm)怎么选料请T&V:153-3800-1126T:170-8463-17981.0%ASTMD1003)