1.5MM防火5va尼龙FR52G30BL美国杜邦30%玻纤,阻然1.5MM防火5va由于"价格"浮动,请您及时来电,耀庆塑胶给你"报价"!!报价,物性表需要＝＝联系电话孙生：180-4691-2680微信同***DuPontPerformancePolymersZytel®HTNFR52G30BLBK337Polyphthalamide(PPA)(UnverifiedData**)物性表物理性能额定值(公制)额定值(英制)测试方法密度1.62g/cc0.0585lb/in³DAM;ISO1183线性成型收缩率,Flow0.0030cm/cm0.0030in/inDAM;ISO294-42577线性成型收缩率，横向0.0080cm/cm0.0080in/inDAM;ISO294-42577机械性能额定值(公制)额定值(英制)测试方法抗张强度(断裂)160MPa23200psiDAM;ISO527-1/-2伸长率(断裂)2.0%2.0%DAM;ISO527-1/-2拉伸模量11.8GPa1710ksiDAM;ISO527-1/-2弯曲强度210MPa30500psi50%RH;ISO178240MPa34800psiDAM;ISO178弯曲模量10.0GPa1450ksiDAM;ISO178简支梁无缺口冲击强度3.50J/cm²16.7ft-lb/in²50%RH;ISO179/1eU5.00J/cm²23.8ft-lb/in²DAM;ISO179/1eU3.50J/cm²@Temperature-30.0°C16.7ft-lb/in²@Temperature-22.0°F50%RH;ISO179/1eU4.00J/cm²@Temperature-30.0°C19.0ft-lb/in²@Temperature-22.0°FDAM;ISO179/1eU简支梁缺口冲击强度1.00J/cm²4.76ft-lb/in²DAM;ISO179/1eA1.00J/cm²@Temperature-30.0°C4.76ft-lb/in²@Temperature-22.0°FDAM;ISO179/1eA电气性能额定值(公制)额定值(英制)测试方法体积电阻率>=1.00e+15ohm-cm>=1.00e+15ohm-cmDAM;IEC60093介电常数3.3@Frequency1.00e+6Hz3.3@Frequency1.00e+6HzDAM;IEC602503.5@Frequency100Hz3.5@Frequency100HzDAM;IEC60250耗散因数0.0050@Frequency100Hz0.0050@Frequency100HzDAM;IEC602500.0135@Frequency1.00e+6Hz0.0135@Frequency1.00e+6HzDAM;IEC60250热性能额定值(公制)额定值(英制)测试方法线形热膨胀系数-流动20.0µm/m-°C11.1µin/in-°FDAM;ISO11359-1/-220.0µm/m-°C@Temperature-40.0-23.0°C11.1µin/in-°F@Temperature-40.0-73.4°FDAM;ISO11359-1/-2100µm/m-°C@Temperature55.0-160°C55.6µin/in-°F@Temperature131-320°FDAM;ISO11359-1/-2线性热膨胀系数,横向流动63.0µm/m-°C35.0µin/in-°FDAM;ISO11359-1/-210.0µm/m-°C@Temperature55.0-160°C5.56µin/in-°F@Temperature131-320°FDAM;ISO11359-1/-257.0µm/m-°C@Temperature-40.0-23.0°C31.7µin/in-°F@Temperature-40.0-73.4°FDAM;ISO11359-1/-2熔融温度310°C590°FDAM;firstheat;ISO11357-1/-3载荷下热变形温度(1.8MPa)282°C540°FDAM;ISO75-1/-2可燃性(UL94)V-0@Thickness1.50mmV-0@Thickness0.0591inDAM;IEC60695-11-10V-0@Thickness0.800mmV-0@Thickness0.0315inDAM;IEC60695-11-105VA@Thickness1.50mm5VA@Thickness0.0591inDAM;IEC60695-11-20材料描述测试方法Emissionoforganiccompounds35µgC/gVDA277Odourclass3VDA270部件标识代码>PA6T/66-GF30FR<ISO11469>PPA-GF30FR<SAEJ1344加工InjectionMoulding供货地区AsiaPacificEuropeGlobalNearEast/AfricaNorthAmericaSouthandCentralAmericaULrecognitionULPA6670G13L美国杜邦高强度,玻纤13%PA6670G13HS1L美国杜邦高强度,玻纤13%PA6670G43L美国杜邦高刚性，玻纤43%PA6670G33L美国杜邦高强度玻纤33%PA6680G33L美国杜邦高强度玻纤33%1.5MM防火5va尼龙FR52G30BL1.5MM防火5va尼龙FR52G30BL)