康百世柱塞泵V23A4LB10X,V23A3LB10X,V23A2LB10X,V23A1LB10X.苏州烨澎机电有限公司经理：黎梓手机：18913141676(同微信)TEL:0512-65485171***1：2608213651***2：1836749669E-mail：LLL35213620@KOMPASS康百世-朝田叶片泵使用说明：转动方向：顺时针方向（丛轴端看）为标准品、仅有此转向。回转方向的确认可由瞬间起动电机来检查。液压油：7MPa以下，使用40℃时粘度20～50cSt(ISOVG32)的液压油7MPa以下，使用40℃时粘度30～68cSt(ISOVG46，VG68)的液压油泄油管压力：泄油管一定要直接插到油箱的油面下，而配光所产生的背压，请维持在0.03MPa以下。工作油温：连续运转的温度为15～60℃轴心配合：泵轴与马达之偏心误差为0.05mm，角度误差为1°吸油压力：吸油口的压力为-0.03MPa～0.03MPa排量调整：排量调整时，先放松调节螺帽，再旋转调整螺栓，右转减少流量，而左转则增加，调整完毕，请上紧螺帽。压力调整：左转（逆时针方向）压力调整螺栓，使输出压力降低，右转（顺时针方向）则升高，调整完毕，请上紧螺帽新机运转：新机开始运转时，应在无压力的状态下反复起动电机马达，以排出泵内和吸油管中的空气，为确保系统内的空气排除，可在无负载的状态下连续运转10分钟。油研柱塞泵PV2R1-8-F-RAB-41PV2R1-10-F-RAA-43PV2R1-14-FRAA-40PV2R1-19-F-RAA-40PV2R1-19-F-RAAPV2R1-31-F-RAAPV2R1-31-F-RAR-40PV2R2-26-F-RAA-41PV2R2-33-F-RAA-40PV2R2-33-F-RAA-41PV2R2-41-F-RAA-41PV2R2-41-L-RAB-41PV2R2-47-FRAA-40PV2R2-47-l-RAA-41PV2R2-65-F-RAA--41PV2R3-94-L-RLR-31PV2R3-116-F-RAAPV2R3-116-F-RAL-31PV2R4-136-F-RAA-30PV2R4-200-L-RAB-30PV2R4-237-F-RLR-30PV2R12-25-65-F-REAB-43PV2R12-31-33-F-REAA-43PV2R12-31-33-F-RFARPV2R212-31/59-FREAP-422PV2R12-31-59-FRAA-422PV2R12-10-33-F-RAAAPV2R14-8-237-F-RAAAPV2R14-8-153-F-RAAA31PV2R23-41-76-FRAAPV2R34-60-237-FREAA-34PV2R34-116-237-FRAAPVR-50LF-26-RLLR-3150T-7-F-RA10-F-R-01-B-10A10-F-R-01-B-12A10-FR01C-12A10-F-R-01-H-12A10-L-R-01-H-K-10A10-F-R-01-C-K-10A16-F-R-01-C-S-K-32A16-L-R-01-C-K-32A16-F-R-01-B-S-K-32A16-F-R-01-B-S-K-32A16-F-R-01-H-S-K-32A16-F-R-01-H-K-32AR16-FR01B-20AR16-FR01C-20AR16-FR01C-20-3HP-4PA16-F-R-01H-K-32A10-F-R-01-B-10A22-F-R-04EH-160-11A22-F-R-01-B-K-32A22-F-R-01-C-K-32A22-F-R-01-B-S-K-32A22-F-R-01-H-K-32A37-FR04EH210S-01-42192A37-L-R-01-C-K-32A37-F-R-01-B-K-32A37-F-R-01-H-S-K-32A37-F-R-04-H-K-A-32366A37-F-R-01-H-K-32A37-FR01-1C1C-20A56-L-R-01-H-S-K-32A56-L-R-01-H-K-32458A56-F-R-01-C-K-32A56-F-R-01-H-K-32A70LR01CS-60)