型号PT-FDW635C/CL电源规格220–240V交流电,3.8A,50/60Hz功耗220–240V交流电690瓦(节能待机模式下*1为0.3瓦，普通待机模式下为8瓦)DLP?芯片控制面板尺寸显示方式像素16.5mm(0.65英寸)对角线(16:10宽高比)DLP?芯片×1,DLP?投影系统1,024,000(1,280×800)像素镜头PT-FDW635C电动变焦(投射比率1.8–2.4:1),电动聚焦F1.7–2.0,f25.6–33.8mmPT-FDW635CL可选的电动变焦/聚焦和固定焦距镜头灯泡280瓦UHM灯泡×2屏幕尺寸（对角线）1.27–15.24m(50–600英寸),1.27–5.08m(50–200英寸)选用ET-DLE055C,16:10宽高比亮度*26,000流明(双灯，灯泡模式:普通模式)中心亮度6,300流明(双灯，灯泡模式:普通模式)均匀性*290%对比度*22,000:1(全开/全关,高对比度模式*3)分辨率1,280x800像素(超出此分辨率的输入信号将转为1,920×1,200像素)扫描频率HDMI/DVI-DfH:15–91kHz,fV:50–85Hz,点时钟:25–162MHzRGBfH:15–91kHz,fV:50–85Hz,点时钟:162MHz或更低YPBPR(YCBCR)fH:15.75kHz,fV:60Hz[525i(480i)]fH:37.50kHz,fV:50Hz[750(720)/50p],fH:27.00kHz,fV:24Hz[1125(1080)/24p]fH:31.50kHz,fV:50Hz[525p(480p)]fH:33.75kHz,fV:60Hz[1125(1035)/60i],fH:27.00kHz,fV:48Hz[1125(1080)/24sF]fH:15.63kHz,fV:50Hz[625i(576i)]fH:33.75kHz,fV:60Hz[1125(1080)/60i],fH:33.75kHz,fV:30Hz[1125(1080)/30p]fH:31.25kHz,fV:50Hz[625p(576p)]fH:28.13kHz,fV:50Hz[1125(1080)/50i],fH:67.50kHz,fV:60Hz[1125(1080)/60p]fH:45.00kHz,fV:60Hz[750(720)/60p]fH:28.13kHz,fV:25Hz[1125(1080)/25p],fH:56.25kHz,fV:50Hz[1125(1080)/50p]视频/S-视频fH:15.75kHz,fV:60Hz[NTSC/NTS***.43/PAL-M/PAL60],fH:15.63kHz,fV:50Hz[PAL/PAL-N/SECAM]光轴移动*4垂直光轴位于屏幕中心时+60%(电动)水平光轴位于屏幕中心时&plu***n;10%(电动)梯形校正范围垂直:&plu***n;40°(选用ET-DLE055C/DLE080C时&plu***n;30°)安装方式吊装/平放，正投/背投终端接口HDMI输入HDMI19-pin×1(兼容HDCP)525p(480p),625p(576p),750(720)/60p,750(720)/50p,1125(1080)/60i,1125(1080)/50i,1125(1080)/25p,1125(1080)/24p,1125(1080)/24sF,1125(1080)/30p,1125(1080)/60p,1125(1080)/50pVGA(640×480)–WUXGA(1,920×1,200)*5,只与逐行信号兼容，点时钟:25-162MHzDVI-D输入DVI-D24-pin×1(兼容DVI1.0,支持HDCP,只与单链路兼容)525p(480p),625p(576p),750(720)/60p,750(720)/50p,1125(1080)/60i,1125(1080)/50i,1125(1080)/25p,1125(1080)/24p,1125(1080)/24sF,1125(1080)/30p,1125(1080)/60p,1125(1080)/50pVGA(640×480)–WUXGA(1,920×1,200)*5,只与逐行信号兼容，点时钟:25-162MHzRGB1输入BNC×5(RGB/YPBPR/YCBCR×1)RGB2输入D-SubHD15-pin(阴)×1(RGB/YPBPR/YCBCR×1)视频输入BNC×1(复合视频)S-视频输入MiniDIN4-pin×1(S-视频)串行输入D-sub9-pin(阴)×1用于外部控制(与RS-232C相容)串行输出D-sub9-pin(阳)×1用于链路控制(与RS-232C相容)远程1输入M3×1用于有线远程控制远程1输出M3×1用于链路控制(有***)遥控2输入D-sub9-pin(阴)×1用于外部控制(并行)局域网RJ-45×1(用于网络连接,10Base-T/100Base-TX,适用于PJLink?)机身材料模压塑料尺度（长×宽×高）PT-FDW635C498×175*6×440mm(包含镜头)PT-FDW635CL498×175*6×432mm(不包含镜头)重量*7PT-FDW635C约16.0kg(包含镜头)PT-FDW635CL约15.1kg(不包含镜头)运行环境运行温度:0°C–45°C*11，运行湿度:20%–80%(无冷凝)提供附件电源线，带安全锁的电源线，无线/有***，遥控器电池(R6/AA种类x2)，软件CD-ROM(Logo传送软件，多台投影***)(x1)尺寸（单位：毫米）投影距离（单位：米）PT-FDW635C/CL(16:10宽高比))