精密电位器22HP-10阻值200欧电气特性：标称阻值范围StandardResistanceRange：100Ω至100KΩ允许阻值偏差TotalResistanceTolerance：标准级StandardClass：&plu***n;5%(J)，精密级Precision：&plu***n;1%(F)***线性阻值偏差IndependentLinearity：标准级StandardClass：&plu***n;0.25%，精密级PrecisionClass：&plu***n;0.1%(低于5KΩ)：(&plu***n;0.15%)额定功率PoweringRating：2W噪声Noise:≦100ΩE.N.R电气行程ElectricalTr***el:360°×n&plu***n;5(n:No.ofturns)机械行程MechanicalTr***el:360°R×n+10(n:No.ofturns)绝缘电阻InsulationResistance:>1000MΩ（500V.D.C.）介质耐压DielectricStrength:1分钟（1000V.A.C）启动力矩StartingTorque:<10mN·m(100gf·cm)止档耐压StopperStrength:约0.35N·m(3.)***大工作电压Max.WorkingVoltage:250V线圈的电阻温度系数Resist.Temperature:&plu***n;20p.p.m./℃材料Materials:轴Shaft：不锈钢StainlessSteel外壳HousingCase：玻璃尼龙Glass-fillednylon轴套Bushing：玻璃尼龙（若是多组型产品，轴套是无镀层的黄铜）Glass-fillednylo(forgangedversion,thebushingismetal-brasswithoutplating)接线端Terminals：镀金黄铜（所有接线端均可插于AMP110系列固定插座2.8×0.5mm或同类插座）Gold-platedbrass(AllterminalscanbefittedwiththeAMP110seriesfastenrecept***e2.8×0.5mmorequivalents)重量Mass：20g安装螺帽固定到轴套的***大力矩Max.TorqueExertedonfasteningthemountingnuttothebushing-----------------<1.0N·m(10kgf·cm)Within1.0N·M（10kgf·cm）如果面板厚度超过2.5mm,旋转力矩可能增大Incaseofpanelthicknesswithover2.5mm.,therotatingtorquemaybecomehe***ier))