储能式点焊机是利用电容储存能量而在瞬时释放出电流，同时集中大电流穿过小积点时而达至溶接效果（焊接过程只几千分之一秒内完成，其间通过数千安培电流）。因此在焊接时所产生之热量引致工件过热氧化和机械变形等情况减至最少。本公司生产之电容储能式点焊机输出由100WS至18000WS，特别适合焊接紫铜、青铜、黄铜、铝、银、不锈钢等多种金属，因此被广泛应用在每一个工业生产和制造业。性能特点：选用广泛：可溶接达8MM不锈钢、铝、钛、银等有色金属，攻克了铜、铝等异种金属焊接的难题。牢固美观：焊接牢固，焊点无发黑，省去打磨工序，特别适合外观要求较高的出口型产品件的加工。省电节能：该款机型从电网取用的瞬间功率低，功率因素高，与同等焊接力的工频机相比，用电只有1/7-1/10,使用成本低。用料配置：→采用日本嘉美工（NCC）即原MARCON或日立（HITACHI）储能式急充放电容，放电速度快、性能稳定。→采用西德SEMIKRON、IXYS或美国IR可控硅，精度高，寿命长，实现了电流大小的高稳定性控制。→采用美国摩托罗拉集成电路，反应速度快，性能稳定。→采用日本或台湾气动件，性能可靠。→所用电器件均为进口知名品牌，使用寿命和性能都十分理想。适用行业：电池、电子、家店、眼镜、餐厨用具等。标准型电容储能式点焊机各型号参数表：型号电压功率储能量电容量加压压力电极行程闭合尺寸平台距离电极距离冷却水VKVAJμFkgmmmmmmmmLit/minWL-C-1K220/1Φ1.538037501005065-115-145-165-WL-C-2K220/1Φ250045001005065-115-145-165-WL-C-2.5K220/1Φ2.5100090002505065-115-145-165-WL-C-3K220/1Φ315001350035080145-225250320-420Min.2380/1ΦWL-C-5K220/1Φ530002700035080145-225250320-420Min.2380/1ΦWL-C-7K220/1Φ745004050050080180-280250320-420Min.3380/1ΦWL-C-10K380/1Φ106000555001000100130-230260490-540Min3WL-C-15K380/1Φ158000735001500100130-230260490-540Min6WL-C-18K380/1Φ18120001080001500100130-230260490-540Min10WL-C-20K380/1Φ20150001350002000100130-230260490-540Min10WL-C-25K380/1Φ25180001620002000100130-230260490-540Min.15WL-C-40K380/1Φ40280002800002000100130-230260490-540Min.15机械尺寸及焊接能力：型号尺寸（㎜）重量铝铜软钢宽深高kgmm×Piecesmm×Piecesmm×PiecesWL-C-1K55067012801700.6×20.6×20.8×2WL-C-2K55067012802000.8×20.8×21.0×2WL-C-2.5K55067012802501.0×21.0×21.2×2WL-C-3K700100015804501.2×21.2×21.5×2WL-C-5K主机45085015803801.6×21.6×21.8×2电容柜4607201300200型号尺寸(mm)重量铝铜宽深高KGMMMMWL-C-7K主机70010521750800电容柜620102013803002.3×22.8×2WL-C-10K主机700105017501100电容柜850100015003502.6×23.0×2WL-C-15K主机900115017501800电源柜40068012502002.8×23.2×2电容柜9005501000210WL-C-18K主机900115017502800电源柜500125014008003.2×23.6×2电容柜9105301660360WL-C-20K主机900115017502800电源柜500125014008003.4×23.8×2电容柜96010702000710WL-C-25K主机900115017503100电源柜90090015009503.6×24.0×2电容柜96010702000780WL-C-40K主机1000125018003500电源柜90090015009504.0×26.0×2电容柜98012001600900)