GALEPAdapter16pinSOIC1.27pitch,150milArticleNo.210849a插座采用SOIC开顶类型通用适配器兼容性GALEP-4,-5,5D及以上管脚数16引脚间距1.27mm(D)封装宽度3.81mm/150mil(B)引脚1从右边开始（红色箭头）插入适配器：打开48引脚双列直插式插座的触点并插入适配器，以便其后端与插座的后端对齐，引脚1（在图像或适配器本身标记）在前面。密切的接触，从而锁定到位适配器。插入设备：向下推ZIF插槽的顶端，直到触点打开。如果可能的话，使用真空选取工具向插座中插入该设备。如果没有特别指明，引脚1位于插座的前沿。释放插座的顶端。如果您使用了引脚较少的设备转换器，放置设备朝向插座（距引脚1）的后边缘。设备编程：编程前，目视检查设备的方向和设备与插座之间的连接。一般情况下编程器可以检测到不正确插入或引脚悬空，但可能会导致读取错误，甚至损坏设备。不要直接接触设备或插座的针脚。删除设备：要取出设备，向下推ZIF插座转换器的顶部，直到触点打开的，挑选并使用工具删除设备。Insertinganadapter:Openthecontactsofthe48-pinDILsocketandinserttheadaptersothatitsbackendalignswiththebackendofthesocket,andPin1(markedintheimageorontheadapteritself)isatthefront.Closethecontacts,thuslockingtheadapterinplace.Insertingthedevice:PushthetopoftheZIFsocketdownwa***untilthecontactsopen.Ifpossible,useavacuumpicktoolforinsertingthedeviceintothesocket.Ifnototherwisementioned,Pin1islocatedatthefrontedgeofthesocket.Releasethetopofthesocket.Ifyouusetheconverterfordeviceswithlesspins,placethedevicetowa***thebackedgeofthesocket(awayfromPin1).Programmingthedevice:Beforeprogramming,visuallycheckthedeviceorientationandtheconnectionofdeviceandsocket.Incorrectinsertionorunconnectedpinsarenormallydetectedbytheprogrammer,butcanleadtoreaderrorsorevendamagethedevice.Donotdirectlytouchthepinsofthedeviceorthesocket.Removingthedevice:Totakeoutthedevice,pushthetopofconverterZIFsocketdownwa***untilthecontactsopen,andusethepicktoolforremovingthedevice.)