WH(原KL滑块联轴器是无弹性元件联轴器的一种，主要用于允许两轴有径向偏移的联接，由两端面有凹槽的半联轴器和中间的方形滑块组成，利用中间滑块在其两侧半联轴器端面的相应径向槽内滑动,以实现两半联轴器联接。WH型滑块联轴器噪声大,效率低,磨损快,一般尽量不选用,只有转速很低的场合,如球磨机等才选用。为了改善平衡状况,螺栓应正、倒相间安装。夹壳联轴器不具备轴向、径向和角向的补偿性能。许用补偿量：轴向△x=1~2mm,径向△y≤0.2mm,角向△α≤40′转速≤300r/min。型号公称转矩Tn(N.m)许用转速[n]r/min轴孔直径轴孔长度DD1B1B2l转动惯量Kg.m2质量kgd1d2YJ1LmmWH1161000010,1112,1425-3222-274030521350.00070.632-4227-30WH231.5820012,12,16,(17),185032561850.00381.5WH363700016,(17),18,20,2242-5230-387040601850.00631.852-6238-44WH4160570020,22,24,25,288050641880.0132.5WH5280470025,28,30,32,3562-8244-60100707523100.0455.882-11260-84WH6500380030,32,35,38,40,42,45120809033150.129.5WH7900320040,42,45,48,50,551128415010012038250.4325112-14284-107WH81800240050,55,60,63,65,7019012015048251.9855WH93550180065,70,75,80,85172-212132-16733019018058404.985172-212132-167WH105000150080,85,90,95,10033019018058407.5120)