FZ-8811电线加热变形试验机PARALLELPLATEPLASTOMETERJIS-C-3005试料本机一定温度中，加热30分钟后，夹在本机平行板间，加规定之荷重，于同温下再经30分钟，然后以加热前后之厚度差，除以加热前厚度，以百分比为单位，即为变形率。Thismachineisusedfortheheatdeformationtestofpowerco***。Putspecimenintotestchamberofthismachineunderacertaintemperaturefor30minutes，thenclampspecimenbetweentwoparallelplates，theupperplatesbeingsubjecttoac***tantloadunderthesametemperaturefor30minutes。Afterwa***，thedifferentialthicknessbefore/afterheatingisdividedbythethicknessbeforeheatingandmultipliedby%forbeingunit，thatisdeformation。试料数量Specimenvolume3组(sets)温度控制器Temp.controllerPID数位设定PIDdigitalsetting温度范围Temperaturerange室温Roomtemp.~200℃砝码Load50，100，200，500，1000g厚度计Micro-gauge0.01~10mm电源PowerAC220V/50Hz)