欧姆龙时间继电器H3Y-21S5S10S30S60SAC220VH3Y-21S5S10S30S60SAC110VH3Y-21S5S10S30S60SDC24VH3Y-41S5S10S30S60SAC220VH3Y-41S5S10S30S60SAC110VH3Y-41S5S10S30S60SDC24VH3BA-N8H（新款多功能）AC220VH3BA-N8H（新款多功能）DC24VH3BA-N8H（新款多功能）AC110VH3BA-NAC220VH3BA-NDC24VH3CR-A8（交直流两用）AC/DC110-220VH3CR-A8（交直流两用）AC/DC12-48VH3CR-A（交直流两用）AC/DC110-220VH3CR-A（交直流两用）AC/DC12-48V设置方法使用前面板按键数字设置显示方法7段式数字显示和单灯指示灯字符高度：PV:9mm；SV:7mm；其工作原理基于光纤的光调制效应，即光纤在外界环境因素，如温度、压力、电场、磁场等等改变时，其传光特性，如相位与光强，会发生变化的现象。MV:6.8mm其它功能根据温控器型号环境温度-10～55℃（不结冰、凝露）环境湿度25%～85%（RH）贮藏温度-25～65℃（不结冰、凝露）显示精度热电偶:（显示值的±0.5%或±1℃,取较大的值）±1数字位（见注1）铂电阻:（显示值的±0.5%或±1℃,取较大的值）±1数字位模拟输入:±0.5%FS±1数字位电位计输入:±5%FS±1数字位比例带宽(P)0.1～999.9℃（以0.1℃为单位）积分时间(I)0～3999s（以1s为单位）浮动控制时为1～3999s微分时间(D)0～3999s（以1s为单位）全闭全开时间1～99s（以1s为单位）手动设置值-10.0%～110.0%（以0.1%为单位）报警设置范围-1999～9999（小数点位置取决于输入类型）采样周期500ms绝缘电阻至少20MΩ2秒（500VDC）绝缘强度2000VAC,50或60Hz,1min（在不同的充电端）抗振性(误动作)10～55Hz,20m/s2,X,Y和Z方向上，各10min抗冲击(误动作)100m/s2在3个轴的6个方向上各3次重量约260g/附件约100g存贮保护EEPROM（断电保存存贮）（写次数：10万次）电源:C200H-PS221C200HW-PA204C200HW-PA204SC200HW-PA204RC200HW-PA209RC200HW-PD024CPU底板,扩展I/O底板:C200H-BC031C200H-BC051C200H-BC081C200H-BC101C200HW-BC031C200HW-BC051C200HW-BC081C200HW-BC101CS1W-BC053CS1W-BC083CS1W-BC103C200HW-BI031C200HW-BI051C200HW-BI081C200HW-BI101标准模块:C200H-IA221C200H-IA222C200H一ID211C200H-ID212C200H-IM212C200HS-INT01C200H-OV001C200H-ID001C200H-ID216C200H-ID217C200H-ID218C200H-ID219C200H-OC221C200H-OC222C200H-OC224C200H-OC225C200H-OD411C200H-OD211)